The Touch Screen IAQ Profile Monitor is a stand-alone Indoor Air Quality (IAQ) monitoring unit, capable of continuously monitoring multiple IAQ parameters. Sensor readings are displayed continuously and in real time.

The Touch Screen IAQ Profile system has been designed to give a visual representation of indoor air quality in a building, as part of the buildings management standards in relation to conditions such as Sick Building Syndrome.

• A compact Indoor Air Quality (IAQ) monitor for use as part of a buildings management standards.
• Built in ‘touch screen’, displaying current IAQ parameters in the building.
• Wall mountable using standard VESA wall bracket
• The unit includes a built in USB port for downloading data quickly and easily.
• Each unit is configurable with up to 8 parameter sensors.
• May be used as a stand-alone monitor or as part of a wider IAQ monitoring network.

The Touch Screen IAQ profile monitor can be configurd with WiFi and or GSM modules. The Wifi module allows you to connect the IAQ monitor to your home/office network with the ability to download sensor data from the unit to another computer. If the IAQ monitor is not within reach of any Wifi network, then you can download the data using the built in USB socket loacated on the side of the instrument. The optional GSM module allows you to receive status updates and alarm alerts from the unit via text message to a mobile device. This early warning system allows you to keep right up to date with what the IAQ monitor is sampling, and also acts as an advance warning for staff working in the vicinity.

Featuring a 4.5" touch screen which is able to display real time sensor data. Easy to use software designed to quickly navigate through various graphs and sensor parameters.

The Touch Screen IAQ unit comes complete with built in Wifi and GSM, with the ability to have notifications sent to a mobile device if required. (E.g. A text message sent to your mobile phone should an alarm be triggered on the IAQ monitor)

A built in Wifi module allows you to add the IAQ monitor to your exisiting network or remotely view sensor data from anywhere in the world.

A single USB module at the side of the unit allows you to plug in removable USB drives to download data from the unit to take with you. Future firmware releases for the unit can be installed onto the device using the USB socket. Please contact PPM Technology for more information on the latest firmware available for your device.

Exclusive management software built specifically for the touch screen IAQ profile monitor

No setup required. Easy navigation between sensor readings using touch.